Important safety information
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injuries, or damage to Sugr Cube or other property. Read all the safety information below before using Sugr Cube.
Indoor use only The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.
Handling Handle Sugr Cube with care. It is made of wood, metal and plastic and has sensitive electronic components inside. Sugr Cube can be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquid. Don’t use a damaged Sugr Cube, as it may cause injury.
Repairing Don’t open Sugr Cube and don’t attempt to repair Sugr Cube by yourself. Disassembling Sugr Cube may cause injury to you or damage to Sugr Cube. If Sugr Cube is damaged, malfunctions, or comes in contact with liquid, contact Sugr.
Battery Don’t attempt to replace the Sugr Cube battery yourself—you may damage the battery, which could cause overheating and injury. The lithium-ion battery in Sugr Cube should NOT be replaced and must be recycled or disposed of separately from household waste. Don’t incinerate the Sugr Cube.
Charging Charge Sugr Cube with the included USB cable and power adapter or other third-party ”Qualified, Genuine, USB Certificated” cables and power adapters which can output 12V 1A or higher current that are Certificated by Qualcomm with QuickCharge2.0.
Using damaged cables or chargers, or charging when moisture is present, can cause electric shock. When you use the USB Power Adapter to charge Sugr Cube, make sure that the AC plug or AC power cord is fully inserted into the adapter before you plug it into a power outlet. Power adapters may become warm during normal use, and prolonged contact may cause injury. Always allow adequate ventilation around power adapters when using them.
Hearing loss Listening to sound at high volumes may damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem quieter than they actually are.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Radio frequency interference Observe signs and notices that prohibit or restrict the use of Wi-Fi device (for example, in healthcare facilities or blasting areas). Although Sugr Cube is designed, tested, and manufactured to comply with regulations governing radio frequency emissions, such emissions from Sugr Cube can negatively affect the operation of other electronic equipment, causing them to malfunction. Turn off Sugr Cube to shutdown wireless transmitters when use is prohibited, such as while traveling in aircraft, or when asked to do so by authorities.
Medical devices Sugr Cube contains radios that emit electromagnetic fields. These electromagnetic fields may interfere with pacemakers or other medical devices. If you wear a pacemaker, maintain at least 6 inches (approximately 15 cm) of separation between your pacemaker and Sugr Cube. If you suspect Sugr Cube is interfering with your pacemaker or any other medical device, stop using Sugr Cube and consult your physician for information specific to your medical device. Sugr Cube has magnets which may interfere with pacemakers, defibrillators or other medical devices. Maintain at least 6 inches (approximately 15 cm) of separation between your pacemaker or defibrillator and Sugr Cube.
Medical conditions If you have any other medical condition that you believe could be affected by Sugr Cube (for example, seizures, blackouts, eyestrain, or headaches), consult with your physician prior to using Sugr Cube.
Explosive atmospheres Do not charge or use Sugr Cube in any area with a potentially explosive atmosphere, such as at a fueling area, or in areas where the air contains chemicals or particles (such as grain, dust, or metal powders). Obey all signs and instructions.
Choking hazard Some Sugr Cube accessories may present a choking hazard to small children. Keep these accessories away from small children.
Important handling information
Cleaning Clean Sugr Cube immediately if it comes in contact with anything that may cause stains—such as dirt, ink, makeup, or lotions. To clean:
• Disconnect all cables and turn Sugr Cube off.
• Use a soft, lint-free cloth.
• Avoid getting moisture in openings.
• Don’t use cleaning products or compressed air.
Using connectors, ports, and knobs Never force a connector into a port or apply excessive torque to a knob, because this may cause damage that is not covered under the warranty. If the connector and port don’t join with reasonable ease, they probably don’t match. Check for obstructions and make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
Discoloring Discoloration of the product after regular use is normal. Dirt, debris, and exposure to liquids may cause discoloration.
Operating temperature Sugr Cube is designed to work in ambient temperatures between 32° and 95° F (0° and 35° C) and stored in temperatures between -4° and 113° F (-20° and 45° C). Sugr Cube can be damaged and battery life shortened if stored or operated outside of these temperature ranges. Avoid exposing Sugr Cube to dramatic changes in temperature or humidity. When you’re using Sugr Cube or charging the battery, it is normal for Sugr Cube to get warm.
If the interior temperature of Sugr Cube exceeds normal operating temperatures (for example, in a hot room or in direct sunlight for extended periods of time), you may experience the following as it attempts to regulate its temperature:
• Sugr Cube stops charging.
• Sugr Cube stops playing.
Sugr Cube Support site
Comprehensive support information is available online at www.sugrsugr.com/support/Sugr Cube.
To contact Sugr for personalized support (not available in all areas), see www. sugrsugr.com/support/contact.
Restarting or resetting Sugr Cube
If something isn’t working right, try restarting Sugr Cube or resetting Sugr Cube.
Restart Sugr Cube: Turn knob counterclockwise until “click” sound happens. Then turn knob clockwise to start Sugr Cube.
Reset Sugr Cube: Use the end of a paper clip or some other similar object to press and hold the Reset button on the back of Sugr Cube at least half second to reset the working Sugr Cube.
Restore Sugr Cube: While Sugr Cube is working, press and hold reset button at least 5 seconds to reset Sugr Cube to the factory default setting.
© 2015 Sugr Company. All rights reserved.
Sugr, the Sugr logo are trademarks of Sugr Company registered in the U.S. and China.